Konica Minolta CM-M6, Instruction Manual

Page: 108 / 128

105
„ „
Communication Setup
Performing settings for communication between CM-M6 and external devices.
Turn ON the Bluetooth function and configure the meter PIN code.
Operating Procedure Start the procedure from the measurement screen.
1
Press [MENU], and then use [

] or [

] to display the
<Setting> screen.
Memo
To return to the previous screen, press the [MENU] or [ESC].
2
Use [  ] or [  ] to move the cursor to
“Communication setup”, and then press the
[Confirmation] key.
The <Communication setup> screen
is displayed.
„
USB Host
This setting must be set to “ON” in order to use the instrument via Bluetooth.
Memo
The USB host is set to “OFF” under the initial settings.
Operating Procedure Start the procedure from the <Setting> - <Communication setup> screen.
1
Use [

] or [

] to move the cursor to “USB host”,
and then press the [Confirmation] key.
The <USB host> screen is displayed.
Sample
Setting
0002 TARGET-2
Default data setup
Calibration setup
Communication setup
Instrument setup
Diagnosis info.
Communication setup
Sample
Setting
0002 TARGET-2
USB host
OFF
Meter PIN code
0000
Printer address
000000000000
Auto print
OFF
Communication setup
Sample
Setting
0002 TARGET-2
USB host
OFF
Meter PIN code
0000
Printer address
000000000000
Auto print
OFF