Konica Minolta CM-23d, Instruction Manual

Page: 95 / 151

92 91
Set
ting
3
„ Observer/Illuminant 2
Select the secondary illuminant used for MI (metamerism index) calculation, etc.
Memo
Observer/Illuminant 2 is set to “10°/F11” when the instrument is shipped from the factory.
Operating Procedure Start the procedure from the <Measurement cond.> - <Observer/Illuminant> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Observer/
Illuminant 2”, and then press the [Confirmation] key.
The <Observer/Illuminant 2> screen is displayed.
2
Use [
▲
] or [
▼
] to move the cursor to the desired
item.
Settings
{ The setting values are the same as those for “Observer/
Illuminant 1” or “None”.
3
Press the [Confirmation] key.
The selection is confirmed and the screen returns to the
<Observer/Illuminant> screen
.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Observer/Illuminant> screen.