Konica Minolta CM-23d, Instruction Manual

Page: 85 / 151

82 81
Set
ting
3
„ Measurement mode
Select a measurement mode.
Memo
The measurement mode is set to “Color only” when shipped from the factory.
Operating Procedure Start the procedure from the <Measurement cond.> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Measurement
mode”, and then press the [Confirmation] key.
The <Measurement mode> screen is displayed.
2
Use [
▲
] or [
▼
] to move the cursor to the desired
measurement mode.
Selections
{ Color only: Colorimetry
{ Opacity: Opacity value measurement
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
previous screen.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the previous screen.