Konica Minolta CM-23d, Instruction Manual

Page: 76 / 151

73
„
Default Data Settings
This instrument allows pass/fail judgment criteria to be set for individual color difference target data. Until such
judgment criteria are set, the instrument is set with the default tolerance. Users can edit the tolerance that will be
used as the judgment criteria as well as edit the warning level and the parametric coefficient default value.
Memo
• When a new target is measured, the default settings are initially applied.
• The default judgment criteria is set before judgment criteria for each target is set.
• Changing the default judgment criteria after the judgment criteria has already been set for individual targets, the
judgment criteria specified for these targets will not be changed.
• The optional Color Management Software “SpectraMagic NX” allows for easy configuration and use of judgment
criteria.
Operating Procedure Start the procedure from the measurement screen.
1
Press [MENU], and then use [
◀
] or [
▶
] to display the <Setting> screen.
2
Use [
▲
] or [
▼
] to move the cursor to “Default data setup”, and then press the [Confirmation] key
to display the <Default data setup> screen.