Konica Minolta CM-23d, Instruction Manual

Page: 72 / 151

69
„ Warning Level Setting
When a warning level is set, warnings will be displayed when the measured data nears but does not exceed the
tolerance.
Operating Procedure Start the procedure from the <Target menu> - <Pass/Fail> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Warning
level”, and then press the [Confirmation] key.
The <Warning level> screen
is displayed.
2
Use [
▲
] or [
▼
] to change the value.
Settings
{ 000 to 100%
3
Press the [Confirmation] key after completing the
changes.
The setting is confirmed and the screen returns to the
<Pass/Fail> screen
.
Notes
If [ESC] is pressed during configuration, the settings will
not be changed and the screen will return to the <Pass/
Fail> screen.