Konica Minolta CM-23d, Instruction Manual

Page: 57 / 151

54 53
Measur
ement
2
„ Change list position
Specifying sample numbers allows for specified sample to be selected without the need to scroll the screen.
Setting Procedure Start the procedure from the <Sample menu> - <Data management> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Change list
position”, and then press the [Confirmation] key.
The <Change list position> screen is displayed.
2
▲
and
▼
will be displayed above and below the data
number. Use [
▲
] or [
▼
] to specify a value. Use [
◀
]
or [
▶
] to move between digits.
3
Press the [Confirmation] key.
The selection is confirmed and the screen returns to the
<Sample> screen .
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Data management> screen.
Notes
Numbers with no measurement data cannot be selected.