Konica Minolta CM-23d, Instruction Manual

Page: 52 / 151

49
„
Print Data (Sample)
Print the sample. The instrument must be connected to the serial printer in advance. For instructions on how to
connect the instrument to a serial printer, refer to P.117 “Connecting to a Printer/Barcode Reader”.
Notes
• Display the sample to be printed on the <Sample> screen in advance.
• If a proper connection is not established, printing will not be possible.
• Even if the printer is connected correctly, printing may not be possible under some circumstances, such as if
the printer is turned OFF when printing.
Display the sample to be printed on the <Sample> screen in advance.
Setting Procedure Start the procedure from the <Sample menu> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Print data”,
and press the [Confirmation] key to display the
<Print data> screen. Printing will begin from the
connected printer.
When printing is complete, the screen returns to the
<Sample> screen .
Notes
The <Print data> screen is displayed even when data will
not be printed properly due to an improper printer
connection or other problem.