Konica Minolta CM-23d, Instruction Manual

Page: 126 / 151

123
This section explains how to configure calibration, how to display the instrument diagnosis info., and how to
display the instrument info.
Operating Procedure Start the procedure from the measurement screen.
1
Press [MENU], and then use [
◀
] or [
▶
] to display the
<Setting> screen.
Memo
To return to the previous screen, press [MENU] or [ESC] .
„
Calibration setup
Configure the instrument calibration settings.
Operating Procedure Start the procedure from the <Setting> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Calibration
setup”, and then press the [Confirmation] key.
System Settings