Konica Minolta CM-23d, Instruction Manual

Page: 122 / 151

119
„ PIN Code Configuration
Enter the PIN set for the printer/barcode reader (already confirmed).
Operating Procedure Start the procedure from the <Setting> - <Communication setup> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Printer PIN code” or “Scanner PIN code”, and then press the
[Confirmation] key.
• The initial personal identification number (PIN) code is “0000”.
2
Use [
▲
], [
▼
], [
◀
], or [
▶
] to enter the PIN code.
• The PIN should consist of between four and eight numbers (0 to 9).
3
After inputting the value, move the cursor to [OK] and press the [Confirmation] key.
The printer/barcode reader will be connectable as an I/O device for the instrument, and the display will return
to the
<Communication setup> screen .
Memo
If [ESC] is pressed during configuration, or if the cursor is moved to “Cancel” and the [Confirmation] key is pressed,
the settings will not be changed, and the screen will return to the <Communication setup> screen .