Konica Minolta CM-23d, Instruction Manual

Page: 121 / 151

118 117
Other Functions
4
„ { Instrument Preparation
Connecting the Bluetooth module to the instrument, and turn ON the instrument’s Bluetooth function. (Refer to
P.113.)
Notes
Until the instrument’s Bluetooth function is turned ON, registration and automatic printing configuration of
the Bluetooth printer/reader is not possible.
„
Registering a Bluetooth Address
Operating Procedure Start the procedure from the <Setting> - <Communication setup> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Printer address” / “Scanner address”, and then press
the[Confirmation] key.
The <Printer address> / <Scanner address> screen is displayed.
2
Enter the address of the Bluetooth device to be connected.
3
After inputting the characters, move the cursor to [OK] and press the [Confirmation] key.
The printer/barcode reader will be registered as an I/O device for the instrument, and the display will return to
the
<Communication setup> screen .
Memo
If
[ESC]
is pressed during configuration, or if the cursor is moved to “Cancel” and the
[Confirmation] key
is pressed,
the settings will not be changed, and the screen will return to the <Communication setup> screen .