Konica Minolta CM-23d, Instruction Manual

Page: 108 / 151

105
„ Beep
Operation sounds can be set to ON or OFF.
Memo
The “Beep” setting is set to “ON” when the instrument is shipped from the factory.
Operating Procedure Start the procedure from the <Setting> - <Instrument setup> screen.
1
Use [
▲
] or [
▼
] to move the cursor to “Beep”, and
then press the [Confirmation] key.
The <Beep> setting screen is displayed.
2
Use [
▲
] or [
▼
] to move the cursor to select ON or
OFF.
Settings
{ OFF
{ ON (Standard)
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen
.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed, and the screen will
return to the <Instrument setup> screen.