Konica Minolta CA-410 Series, Instruction Manual

Page: 14 / 140

12
Probes
1. About Probes
A CA-410 series probe can be used to measure the luminance, chromaticity, and flicker values of displays.
A probe can be controlled in the following three ways:
• You can connect a probe to a PC and control it from PC software to perform measurement. By using the standard
software, PC Software CA-S40 For Color Analyzers, you can select one of the probes connected to a PC via USB and
control it to perform measurement.
Display
PC
CA-S40
USB cable connection
Probes (only one probe can be controlled)
• You can connect a probe to a data processor and control it from the data processor to perform measurement. Multiple
probes can be controlled simultaneously to perform measurement.
Display
Mini DIN cable connection
or USB cable connection
Data Processor
Probes (up to 10 probes can be controlled simultaneously)
• You can connect a probe to a data processor, connect the data processor to a PC, and control it from PC software to
perform measurement. By using the standard software, PC Software for Color Analyzer CA-S40, you can select one of the
probes connected to the data processor and control it to perform measurement.
PC
CA-S40
RS-232C
Display
PLC or PC
Mini DIN cable
connection or USB
cable connection
Data Processor
USB
connection
BNC (sync/trigger)
Probes (only one probe can be controlled)