Konica Minolta CA-410 Series, Instruction Manual

Page: 130 / 140

128
Bluetooth Connection
1. Connecting via Bluetooth
Connect the instrument to a PC with Bluetooth communication functionality using the optional Bluetooth module.
Memo
To connect the instrument to a PC via the Bluetooth function, appropriate preparations for Bluetooth communication must
be performed in advance for both the instrument and the printer.
 Preparation on the Instrument
Connect the optional Bluetooth module CM-A219.
Turn ON the instrument’s Bluetooth function and configure the PIN code on the instrument as required.
Connecting the Bluetooth Module
Operating Procedure
1
Remove the screw from the Bluetooth
module slot on the instrument, slide the
cover to open it, and insert the Bluetooth
module.
Notes
When inserting the Bluetooth module, please note
that the module will be slightly loose. Pushing
forcibly on the module may damage the connector if
the module and the connector on the instrument are
not aligned correctly.
Screw
Cover
2
Slide the cover to close it, and tighten
the screw.
Bluetooth module
The inserted part can be
viewed from this view
window.