Konica Minolta CA-410 Series, Instruction Manual

Page: 122 / 140

120
Initializing the Settings
This function resets the settings back to the factory settings. The initialization does not delete the measured values, target
values, and user calibration information stored in the instrument.
Operating Procedure
1
While the measurement screen is
displayed, press the [MENU] key.
The setting screen is displayed on the LCD screen.
2
Press the [UP] or [DOWN] key to select
[System], and then press the [RIGHT] or
[ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
ON[10 min ]
2017/11/05
yyyy/mm/dd
OFF
9600
ON
English
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
3
Press the [UP] or [DOWN] key to select
[Initialize], and then press the [ENTER]
key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
ON[10
min
]
2017/11/05
yyyy/mm/dd
OFF
9600
ON
English
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
4
The screen for selecting whether or not
to initialize the instrument is displayed.
Press the [RIGHT] or [LEFT] key to make a
selection, and then press the [ENTER]
key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
ON[10
分
]
2017/11/05
yyyy/mm/dd
OFF
9600
ON
日本語
省電力モード
日時設定
日付フォーマット
Bluetooth
RS-232C
ボーレート
DHCP
言語
本体情報
初期化する
ID
山路を登りながら
Initialization
Initialize settings?
No Yes
5
Press the [ESC] key twice.
The measurement screen is displayed on the LCD
screen.