Konica Minolta CA-410 Series, Instruction Manual

Page: 121 / 140

119
Checking the Instrument Information
Information about the data processor, such as the serial number and firmware version, can be viewed.
Operating Procedure
1
While the measurement screen is
displayed, press the [MENU] key.
The setting screen is displayed on the LCD screen.
2
Press the [UP] or [DOWN] key to select
[System], and then press the [RIGHT] or
[ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
ON[10 min ]
2017/11/05
yyyy/mm/dd
OFF
9600
ON
English
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
3
Press the [UP] or [DOWN] key to select
[Instrument Info], and then press the
[ENTER] key.
Version and other information about the instrument
are displayed on the LCD screen.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
ON[10
min
]
2017/11/05
yyyy/mm/dd
OFF
9600
ON
English
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
4
Press the [ESC] key twice.
The measurement screen is displayed on the LCD
screen.
CA
-DP40
Set
tings