Konica Minolta CA-410 Series, Instruction Manual

Page: 115 / 140

113
Save Destination Setting
This instrument can be configured to select the destination to save measurement data automatically or manually.
* Factory setting: AUTO
Operating Procedure
1
While the measurement screen is
displayed, press the [MENU] key.
The setting screen is displayed on the LCD screen.
2
Press the [UP] or [DOWN] key to select
[Option], and then press the [RIGHT] or
[ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
Absolute
3 (Normal)
ON
ON
AUTO
cd/
㎡
Color Space
Absolute/difference
Brightness
Buzzer
Auto 0-cal
Save Destination
Luminance Units
3
Press the [UP] or [DOWN] key to select
[Save Destination], and then press the
[ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
Absolute
3 (Normal)
ON
ON
AUTO
cd/
㎡
Color Space
Absolute/difference
Brightness
Buzzer
Auto 0-cal
Save Destination
Luminance Units
4
The screen for selecting [AUTO] or
[MANUAL] is displayed. Press the [UP] or
[DOWN] key to make a selection.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
◉ AUTO
○ MANUAL
Color Space
Absolute/difference
Brightness
Buzzer
Auto 0-cal
Save Destination
Luminance Units
5
Press the [ESC] key.
The measurement screen is displayed on the LCD
screen.
The Save Destination setting will be kept even if the
POWER switch is set to OFF (
 ).
CA
-DP40
Set
tings