Konica Minolta CA-410 Series, Instruction Manual

Page: 112 / 140

110
Setting the Display Brightness
This instrument allows users to set the brightness of the external LCD screen.
* Factory setting: 3 (Standard)
Operating Procedure
1
While the measurement screen is
displayed, press the [MENU] key.
The setting screen is displayed on the LCD screen.
2
Press the [UP] or [DOWN] key to select
[Option], and then press the [RIGHT] or
[ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
Absolute
3 (Normal)
ON
ON
AUTO
cd/
㎡
Color Space
Absolute/difference
Brightness
Buzzer
Auto 0-cal
Save Destination
Luminance Units
3
Press the [UP] or [DOWN] key to select
[Brightness], and then press the [ENTER]
key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
Absolute
3 (Normal)
ON
ON
AUTO
cd/
㎡
Color Space
Absolute/difference
Brightness
Buzzer
Auto 0-cal
Save Destination
Luminance Units
4
The screen for selecting a brightness is
displayed. Press the [UP] or [DOWN] key
to select a brightness.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
◉ ON
○ OFF
Color Space
Absolute/difference
Brightness
Buzzer
Auto 0-cal
Save Destination
Luminance Units
5
Press the [ESC] key.
The measurement screen is displayed on the LCD
screen.
The brightness setting will be kept even if the
POWER switch is set to OFF (
 ).