Konica Minolta bizhub pro C6501, User Manual

Page: 22 / 472

2 Paper Setting
2-4 bizhub PRO C6501
Both Sides Adj.
Specify the Vertical zoom, Horizontal zoom, Up/Down shift amount,
Right/Left shift amount, and Registration Loop for both front and back pag-
es.
Vertical zoom: Front -100 to +100, Back -80 to +20 (in 0.1% increments)
Horizontal zoom: -100 to +100 (in 0.1% increments)
We recommend you performing this adjustment every day or every time the
tray is loaded with different type of paper, because the coefficient of
contraction varies according to the paper type, brand, or the difference in
temperature and humidity of paper repository.
The Horizontal zoom of the Back side is specified with 01 System Setting of
the Machine Admin. Setting.
This adjustment can be performed using a chart in Paper Setting accessed
only from Copy Screen and Machine Status Screen.
Process Adj.
Usually, this adjustment is not available. Contact your service representative
for detail.
Collective adjustment of the process adjustment for all tray is specified with
the Machine Admin. Setting.
Size
Select [Standard] or [Custom].
-
The custom sizes registered from Copy Screen or Machine Status Screen
can be recalled in paper size setting of User Setting, so that the recalled
size information can be registered together with other paper information.
(Link Size Information)
-
Tab paper in sizes A4
v
, 8.5" ×11"
w
cannot be registered from [Paper
Setting] in the User Setting.
Speed Setting
Copy speed change with paper type and paper weight.
[Speed Setting] can be select from [High], [Middle], or [High/Middle Automat-
ic] only when [Weight] is set to 106 to 135 g/m
2
.
Air Assist
Use the Air Assist function to blow air to the paper from the guide plate inside
the tray in order to prevent feeding troubles which a specific paper type
tends to cause.
Select one of the following four conditions.
Auto, On (Strong), On (Weak), Off