Konica Minolta bizhub PRESS C71cf, Quick Manual, Page: 26 / 143

2-8
2.1 Before Printing
Step 4: Adjust (Image Position and Image Quality)
Adjust the image position and image quality before printing.
) Image Position Adjustment
You can change zoom ratio of images or shift images (forward or backward).
At the time of printing, heat in the fusing section may cause the paper to slightly enlarge or shrink. How much the paper
is affected depends on the type or thickness (weight) of the paper; therefore, after changing the media set, always
perform the [Registration Adj.].
For details, refer to the HTML User's Guide .
Tips
- There are two ways for registration adjustment: One is using [Registration Adj.] on the [MACHINE] screen; the
other is using [Paper Setting] - [Change Set] - [Change IndividualSet] on the [MACHINE] screen.
- When the registration is adjusted in [Paper Setting] on the [MACHINE] screen. You can call the registered paper
profile and easily make paper settings.
)
Image Quality Adjustment
To reproduce stable colors with the machine, use pre-output image quality adjustment.
In addition to regular calibration for the controller, use other image quality adjustments as necessary, such as when
changing screens or papers or when hue is important.
For details on the image quality adjustment flow (which timing, which image quality adjustment, in what order, etc.),
refer to the
HTML User's Guide .