1-10
1.2
Machine Panel
Touch panel (Roll Winder RW-201)
Operate the
touch panel
on
Roll Winder RW-201
to check the status and change the settings of
Roll Winder RW-
101
and
Roll Winder RW-201
.
When the power switch of
Roll Winder RW-101
and
Roll Winder RW-201
is turned
ON
, the [Menu] screen is
displayed.
Tips
If no operations are made on the touch panel for 30 minutes, the
touch panel
enters sleep mode. When you press the
touch panel
during sleep mode, the machine exits sleep mode.
)
[Menu] Screen
This section describes the [Menu] screen.
Tips
Press [Menu] in the taskbar displayed on the top of each screen to display the [Menu] screen.
Reference
For details on the display of the
touch panel
of
Roll Winder RW-201
, refer to the
HTML User's Guide
.
1
2
3
4
No.
Name
Description
1
[1. Machine state/2. Machine setting]
Check the status and specify the settings of
Roll Winder RW-
101
and
Roll Winder RW-201
.
2
[1. Pull rate/2. Loop fan]
Configure operation settings of the
paper feed loop fan
or
winding loop fan
, and the pull rate of the
pull roller
on
Roll
Winder RW-101
and
Roll Winder RW-201
.
3
[1. Wind/2. Paper feed]
Displays the current roll diameter and specifies the maximum
roll diameter alert and preliminary alert diameter settings.
4
[Error]
Displays the [Error] screen if an error occurs on
Roll Winder
RW-101
or
Roll Winder RW-201
.
Summary of Contents for bizhub PRESS C71cf
