Konica Minolta bizhub PRESS C71cf, Quick Manual, Page: 135 / 143

6-9
bizhub PRESS C71cf
6
)
Internal Machine Items
6
1
3 4
5
7
9
8
10 11 12
15
13
2
14
16
17
No. Name Description
1 Loop detection sensor Detects an error of the amount of the media loop.
2 Fixing handle Fixes the media guide to the feeding shaft .
3 Feeding shaft Set a media. Controls the configured media tension.
4 Winding diameter detection sensor Measures the diameter of the media, and alarm beeps when the
media reaches minimum diameter. You can specify the machine
behavior when the alarm beeps.
5 Paper feed loop fan Stabilizes the form of the loop.
6 Lever Attaches or detaches the rubber roller to or from the media.
7 Guide roller Conveys the media.
8 Roller Conveys the media. There are three locations: front side, center,
and back side.
9 Rubber roller Holds and conveys the media.
10 Pull roller Conveys the media.
11 Guide roller Conveys the media.
12 Guide plate Stabilizes the media conveyance.
13 Cutter groove Cuts the media along the groove.
14 Media pressing bar 1 Holds the media when replacing.
15 Media pressing bar 2 Holds the media when replacing.
16 Lug Fixes the media core to the feeding shaft .
17 Lug protruding/retracting handle Turns to move up and down the lug to fix or remove the media
core.