Konica Minolta bizhub PRESS 1052, User Manual, Page: 65 / 540

bizhub PRESS 1250/1052 2-51
2.2 Turning On/Off the Power 2
2.2.2 Turning Off the Power
NOTICE
The main power switch should normally be kept turned on. Be sure not to turn off/on the main power switch
in usual operation.
Be sure not to turn off the main power switch before turning off the sub power switch .
Be sure not to turn off the main power switch while the following messages are displayed after turning off
the sub power switch .
[Cooling in progress / Power will be off when completed]
[Power off in progress / Please do not turn the main power off]
Turning off the main power switch with these messages displayed may cause machine trouble such as toner
fixation.
When turning the main power switch off then on, be sure to wait 10 seconds or longer before turning the
main power switch on again. If the main power switch is turned on again within 10 seconds, the machine
may not operate properly.
1
Turn OFF the sub power switch .
The sub power switch is located on the front of the main body.
The touch panel and all the LEDs on the control panel other
than the Power LED will go out, and the Power LED will turn red
from green.
%
When the machine is under control of the Weekly Timer
function, do not turn off the
sub power switch . Turning off
the sub power switch will deactivate the Weekly Timer
function.
2
Turn OFF the main power switch .
The main power switch is located inside the machine.
It can be reached by first opening the front door, then the left
side door of the main body.
2.2.3 Turning Off Main Power Switch Automatically
The main power switch can be turned off automatically on this machine. The following two settings are pro-
vided.
These settings are provided on the Utility menu and to be performed by the administrator. Ask your admin-
istrator for the time when the
main power switch is turned off.
d
Reference
For details of the setting, see Section 7 of the POD Administrator's Reference.
Setting options Description
Main Power Auto OFF Set-
ting Turns OFF the main power switch automatically after the sub power
switch is turned OFF and the main body is completely cooled down.