manualshive.com logo in svg

Konica Minolta bizhub PRESS 1052, User Manual

Share
Download
Konica Minolta bizhub PRESS 1052 User Manual Download Page 433

bizhub PRESS 1250/1052

9-30

9.4

Checking Output/Send/Incomplete History

9

9.4.2

Displaying Send History

The Send History Screen of the Job List Screen provides a listing of send history.

Details of each job can be checked by accessing the Mode Check Screen.

Follow the procedure below to check the details of jobs.

1

Press [JOB LIST] tab on the screen, then press [Send History].

The Send History Screen will be displayed.

2

Check the status of transmitted jobs on the list of the screen.

%

Use the scroll keys to scroll, if 17 or more transmitted jobs are listed.

No.

Name

Description

1

[Send History]

Pressed to display the Send History Screen.

2

[File Name]

Displays the file name when applied.

3

[User Name]

Displays the user name when registered.

4

[Address]

Displays the destination address.

5

[Result]

Displays the transmission result such as Complete or 
Cancel.

6

[Time]

Displays the time of transmission in 24-hour format.

7

[Mode]

Displays the transmission mode such as Email or FTP.

8

Display number/Total number

At the top the page number of the Send History list 
currently displayed is indicated, and at the bottom the 
total number of the list pages is indicated.

9

[Details]

Pressed to confirm details of a specified job. The 
Mode Check Screen will be displayed.

10

Scroll keys

Pressed to scroll to the desired page of the Send His-
tory list if the list contains more than one page.

Summary of Contents for bizhub PRESS 1052





























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands