Konica Minolta bizhub PRESS 1052, User Manual

Page: 119 / 540

bizhub PRESS 1250/1052 4-18
4.5 Setting Print Quantity 4
4.5 Setting Print Quantity
This section describes how to set or change the print quantity.
4.5.1 Setting Print Quantity
The machine is initially set to copy the original set in amounts determined by the print quantity setting, then
output sorted sets.
0
Available output mode depends on the option configuration and initial setting of the machine.
%
Enter the desired print quantity from the control panel keypad .
The entered print quantity will be displayed on the Copy Screen.
4.5.2 Changing Entered Print Quantity
Follow the procedure below to change the print quantity that has been already entered.
1
Press C on the control panel .
The quantity displayed on the Copy Screen will return to [0001].
2
Enter the new quantity from the control panel keypad .
The entered print quantity will be displayed on the Copy Screen.