manualshive.com logo in svg

Konica Minolta bizhub C451, User Manual

Share
Download
Konica Minolta bizhub C451 User Manual Download Page 451

bizhub C650/C550/C451 (FE3)

5-85

Network Scanner Operations

5

E-Mail setting

When data is sent, an e-mail message containing the document name can be sent to the specified e-mail 
address.

!

Detail 

The information specified as the document name is used with Scan to FTP, Scan to SMB and Scan to 
WebDAV operations.

If "Change the "From" Address" (displayed by touching [System Settings] on the Administrator Settings 
screen, then [Restrict User Access], then [Restrict Operation]) is set to "Restrict", the From address 
cannot be entered directly.

1

Touch [Communication Settings] in the Fax/Scan mode screen.

2

Touch [E-Mail Settings].

3

Specify the e-mail transmission settings.

4

Touch [Close], and then touch [Close] in the next screen that appears.

Parameter

Description

Document  Name

The name of the file to be saved is displayed. The document name specified later appears 
as the document name, even if the document name was specified with "Document 
Name" on the Scan Settings screen. If no document name is specified, the name auto-
matically specified based on the settings in the Administrator Settings screen is dis-
played. A maximum of 30 characters can be entered.

Subject

The text specified from Utility mode is automatically displayed. Touch [Direct Input] to 
change the text. A maximum of 64 characters can be entered.

From

The e-mail address specified from Utility mode is automatically displayed.

Body

The text specified from Utility mode is displayed. Touch [Direct Input] to change the text. 
A maximum of 256 characters can be entered.

Summary of Contents for bizhub C451













































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands