Konica Minolta bizhub C451 User Manual Download Page 334

Page: 334 / 620

Box Operations

4-38

bizhub C650/C550/C451 (FE3)

4.9

Checking document details

The details of saved documents can be checked from the touch panel.

The following information can be checked from the Document Details screen.

Detail

The preview screen can be displayed by touching a button in the sub display area or by touching a
button in the Document Details screen.

Check the details

Note

Multiple documents can be selected.

From the File Document screen, select the document to be checked.

Touch [Document Details].

The Document Details screen appears.

Item

Description

Registered Time

Displays the date and time that the document was stored.

User Name

Displays the mode (Scan, Copy or Print) and name of the user who stored the document.

Document Name

Displays the name of the document.

No. of Pages

Displays the number of pages in the document.

Job No.

Displays the job number when the document was stored.

[Preview] button

Touch this button to display the Enlarged Thumbnail View screen. For details, refer to "Preview
screen operations" on page 4-40.

Summary of Contents for bizhub C451













































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for bizhub C451

Reviews:

Brands by name

Popular brands

Konica Minolta bizhub C451, User Manual

Search results

Summary of Contents for bizhub C451

Reviews:

Brands by name

Popular brands