Konica Minolta BIZHUB C353P, User Manual

Page: 183 / 516

C353P 6-12
Print functions of the printer driver for Macintosh
6
2
Note
"Staple" and "Saddle Stitch/Fold" functions are available only if the optional finisher is installed.
The "punch" function is available only if the punch kit is installed on the optional finisher.
The "Center Erase" function is available only when optional finisher FS-609 is installed and the "Center
Staple and Fold" function is specified.
Function name Option Description
Print Type 1-Side, 2-Sided, Booklet Specifies duplex printing and booklet printing.
Binding Position Left stitch, right stitch, top stitch Specifies the binding position.
Poster Mode 2 × 2, 3 × 3, 4 × 4 Prints one sheet of an original divided on multiple pag-
es. "Poster Mode Overlap" allows you to specify the
presence of the border frame.
Overlap width line ON/OFF Specifies the presence of a poster mode overlap. This
setting can be specified when the "Poster Mode" set-
ting is other than "OFF".
Rotate _180 ON/OFF Rotates 180° to print.
Image Shift ON/OFF Prints by shifting the entire print image. The screen is
displayed when the setting is enabled and allows you
to set the detail of the shift length.
Front Side/Back Side Specifies the shift direction and values. For 2-sided
printing, clearing the "Same Value for Front and Back
Sides" check box allows you to set different values
between the front and back sides.
Chapters ON/OFF Specifies the page to be printed on the front side. The
screen is displayed when the setting is enabled and al-
lows you to set the page.
You can specify it when the print type is "2-sided" or
"Booklet".
Page Number Specifies the page to be printed on the front side
when "Chapters" is selected.
Staple ON/OFF Specifies stapling.
From the drop-down list, specify the number of sta-
ples and the stapling position.
Punch ON/OFF Specifies hole punching.
From the drop-down list, specify the number of
punches and the position.
Fold & Staple Off, Center Staple & Fold, Half-Fold Specifies to half fold and center staple.
Center Erase ON/OFF Does not print on the center fold line with Center Sta-
ple and Fold.
Paper Arrangement Finishing Priority, productivity prior-
ity Specifies the method for adjusting the binding posi-
tion for 2-sided print. The biding position is adjusted
after receiving all data for finishing priority. When Pro-
ductivity Priority is specified, the machine processes
data reception and printing concurrently.