Konica Minolta bizhub C35, Service Manual

Page: 214 / 330

DRAFT
Field Service V er. 1.0 Feb. 2010 10. SER V ICE MODE
175
bizhub C35
ADJUSTMENT
/ SETTING
10.19.3 Sensor Check/Scanner Sensor Check
A. Use
• To display the states of the input ports of sensors and switches when the machine
remains stationary.
• Used for troubleshooting when a malfunction or a misfeed occurs.
• The operation of each of the switches and sensors can be checked on a real-time basis.
• It can be checked as long as the 5-
V power line remains intact even when a door is open.
B. Sensor check list
Symbol Panel display Part/signal name
Operation characteris-
tics/panel display
ON OFF
001/004
PS2 Tray 2 Empty Tray2 media empty sensor Paper
present
Paper not
present
PS3 Tray 1 Empty Tray1 media empty sensor Paper
present
Paper not
present
PS1 Tray 3 Empty Tray3 media empty sensor Paper
present
Paper not
present
PS1 Tray 4 Empty Tray4 media empty sensor Paper
present
Paper not
present
PS5 Sync Roller Registration sensor Paper
present
Paper not
present
002/004
PS6 Paper Loop Loop detection sensor Paper
present
Paper not
present
PS8 Exit Exit sensor Paper
present
Paper not
present
PS7 Paper Full Tray media full sensor Paper
present
Paper not
present
PS9 Duplex Duplex conveyance sensor Paper
present
Paper not
present
PS3 Tray 3 Feeder Tray3 media feed sensor Paper
present
Paper not
present
003/004
PS3 Tray 4 Feeder Tray4 media feed sensor Paper
present
Paper not
present
PS17 1st Trans 1st transfer release sensor Engaged Released
PS1 Tray 2 Set Tray2 set sensor Set Unset
SW1 Tray 3 Size 1 Tray3 media size switch ON OFF
SW1 Tray 3 Size 2 Tray3 media size switch ON OFF
004/004
SW1 Tray 3 Size 3 Tray3 media size switch ON OFF
SW1 Tray 4 Size 1 Tray4 media size switch ON OFF
SW1 Tray 4 Size 2 Tray4 media size switch ON OFF
SW1 Tray 4 Size 3 Tray4 media size switch ON OFF
PS12 Waste Toner Waste toner near full sensor Full Not full