Konica Minolta bizhub C35, Service Manual

Page: 197 / 330

DRAFT
10. SER V ICE MODE Field Service V er. 1.0 Feb. 2010
158
ADJUSTMENT
/
SETTING
10.9.8 Gradation
A. Use
• Prints the gradation pattern.
• To check the gradation reproductively.
B. Procedure
1. Set the A4 or Letter paper on the tray.
2. Call the Service Mode to the display.
3. Touch [Print Menu]
→
[Gradation].
4. Select [Print], and touch [OK].
10.9.9 Scanner Adjustment
A. Use
• Prints the list of the scanner and ADF related setting values.
B. Procedure
1. Set the A4 or Letter paper on the tray.
2. Call the Service Mode to the display.
3. Touch [Print Menu]
→
[Scanner Adjustment].
4. Select [Print], and touch [OK].
10.9.10 Scan Event Log
A. Use
• Prints the data of the number of times jam has occurred during scanning and the jam his-
tory.
B. Procedure
1. Set the A4 or Letter paper on the tray.
2. Call the Service Mode to the display.
3. Touch [Print Menu]
→
[Scan Event Log].
4. Select [Print], and touch [OK].
10.10 Supplies
10.10.1 Consumable Replace-Transfer Belt Unit
A. Use
• Resets the transfer belt unit counter.
• To use when the transfer belt unit has been replaced.
B. Procedure
1. Call the Service Mode to the display.
2. Touch [Supplies]
→
[Consumable Replace]
→
[Transfer Belt Unit].
3. Select [Yes], and touch [OK].