Konica Minolta BIZHUB C3351, Quick Start Manual

Page: 71 / 102

5-2 bizhub C3851FS/C3851/C3351
Preparation for network connection (for administrators) 5 5.1
In
it
ia
l Set
ti
n
g
s
o
f Th
is
M
ach
in
e
Ch
apter 5
5 Initial Settings of This Machine
5.1 Preparation for network connection (for administrators)
Checking a LAN cable for connection
Check that a LAN cable connected to the network is connected to the LAN port of this machine.
For details on the cable connection port, refer to page 3-4.
Assigning an IP address
If this machine has a fixed IP address, manually enter the IP address, subnet mask, and default gateway ad-
dress.
In the Control Panel , select [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Setting] - [IPv4
Settings], then configure the following settings.
Tips
- To check the IP address assigned to this machine, select [Utility]-[Device Information].
Settings Description
[IP Application Method] To manually enter the IP address, select [Manual Input].
To automatically obtain the IP address using DHCP, select [Auto Input], then
specify the auto input method.
[Auto Input] is specified by default.
[IP Address] Enter the fixed IP address assigned to the machine.
[Subnet Mask] Enter the subnet mask.
[Default Gateway] Enter the default gateway.