manualshive.com logo in svg

Konica Minolta BIZHUB C30P, User Manual, Page: 247 / 276

Share
Download
Konica Minolta BIZHUB C30P User Manual Download Page 247

CompactFlash 

233

CompactFlash

If a CompactFlash card is installed, resources such as fonts, macros and pro-
files can be downloaded, and image files can be printed directly.

"

Only CompactFlash cards with a capacity of 256 MB, 512 MB or 1 GB 
can be used.

"

The Hold Job function is not available with a CompactFlash card. 
These functions require that an optional hard disk drive be installed.

Installing the CompactFlash card

Note

If the installed CompactFlash card was used with a device other than 
this printer, such as a computer or digital camera, the card is 
automatically formatted and all of its data is deleted.

Note

It is very important to protect the printer controller board and any 
associated circuit boards from electrostatic damage. Before performing 
this procedure, review the antistatic caution on page 226. In addition, 
always handle circuit boards by their edges only.

1

Turn off the printer and discon-
nect the power cord and inter-
face cables.

Summary of Contents for BIZHUB C30P





















































































































































































































































































Reviews:

No comments