
Media Types
101
Thick Stock
Paper thicker than 90 g/m
2
(24 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
"
Banner Paper
Weight: 127-160g/m
2
Width: 216mm
Length: 357-1200mm
DO NOT use thick stock that is
Mixed with any other media in Tray 1 (as this will cause printer misfeed-
ing)
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
Capacity
Tray 1
(Manual Feed
Tray)
Up to 20 thick stock sheets, depending on
their thickness.
Tray 2/3/4
Not supported
Orientation
Face down
Driver
Media Type
Thick 1 (91-150 g/m
2
)
Thick 2 (151-210 g/m
2
)
Weight
91–210 g/m² (25–55.9 lb bond)
Duplexing
Not supported
Glossy
Mode
ON/OFF
Supported
"
Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
Capacity
Tray 1
(Manual Feed
Tray)
Up to 10 envelopes, depending on their
thickness
Tray 2/3/4
Not supported
Orientation
Face down
Driver
Media Type
Envelope
Weight
91–163 g/m² (25–43 lb bond)
Summary of Contents for BIZHUB C30P
