Konica Minolta bizhub C258 Quick Start Manual Download Page 164

Page: 164 / 266

bizhub C368/C308/C258

4-3

4.1

Using advanced functions

Chapt

r 4

In addition, this machine supports advanced functions such as the barcode font, unicode font, and OCR font.

Reference

For details, refer to the User's Guide CD.

4.1.2

Association with application

To use the My Panel or My Address function, you need to purchase

My Panel Manager

and enable the target

function in the application side.

For details on how to enable such a function, refer to the

My Panel Manager

User's Guide.

Tips

The

Extension Memory

is required to use the My Address function.

4.1.3

Registering the i-Option license

To add an optional function to this machine, you need to purchase

i-Option

and register its license.

Tips

Check that this machine can be connected to the Internet.

The

Extension Memory

is required to use

i-Option LK-102 v3/LK-104 v3/LK-105 v4/LK-106/LK-

107/LK-108/LK-110 v2/LK-114

i-Option LK-110 v2

includes the function licenses for

i-Option LK-102 v3

and

i-Option LK-105 v4

. If

you purchase

i-Option LK-110 v2

, you do not need to purchase

i-Option LK-102 v3

i-Option LK-

105 v4

For details on how to purchase or install an optional unit, contact your service representative.

Preparation flow

The following describes a preparation flow to use advanced functions. For details, refer to the relevant page.

This preparation is not required the second time or subsequent times.

Enabling the

i-Option

function (Administrator)

Enable the

i-Option

function on this machine. For details, refer to page 4-4.

If you cannot enable the function above, proceed to steps 2 and 3.

Registering the

i-Option

license (Administrator)

Enabling the

i-Option

function using the license (Administrator)

Enter the license code to enable the function. For details, refer to page 4-8.

Configuring each function (Administrator)

Configure the required settings for each advanced function. For details, refer to page 4-9.

Reference

For details on the procedure, refer to the User's Guide CD.

Summary of Contents for bizhub C258











































































































































































































































































Search results

Summary of Contents for bizhub C258

Reviews:

Related manuals for bizhub C258

Brands by name

Popular brands

Konica Minolta bizhub C258, Quick Start Manual

Search results

Summary of Contents for bizhub C258

Reviews:

Related manuals for bizhub C258

Brands by name

Popular brands