manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 477

11

Managing jobs (Job List)

11-8

C250

M

a

na

g

ing

 jo

bs

 (

J

ob

 L

ist

)

Ch

ap

te

r 11

To check the job settings

Job settings for stored jobs, jobs being printed, jobs queued to be printed 
and held jobs can be checked.

1

In the Basic screen, touch [Job List].

The Job List screen appears.

2

Display the list containing the job whose settings are to be checked.

3

Select the job whose settings are to be checked, and then touch 
[Check Job].

–

If an incorrect job was selected, select a different job or touch the 
button for the selected job again to deselect it.

–

The Mode Check screen appears.

–

The contents and number of Mode Check screens differ depending 
on the job that was selected.

–

The number to the left of [

←

Back] indicates the number of the cur-

rently displayed screen/the total number of screens.

–

To display the previous screen, touch [

←

Back]. To display the next 

screen, touch [Fwd.

→

].

4

To finish checking the settings, touch [Close] or [Exit], or press the [Re-
set] key.

–

To return to the screen displayed before [Check Job] was touched, 
touch [Close].

–

To return to the Basic screen, touch [Exit] or press the [Reset] key.

c250.book  Page 8  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands