manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 364

Application functions

8

C250

8-19

App

lica

tio

n f

unct

ions

Chapter 8

8.6

Producing separate copies of each page in a page 
spread (“Book Copy” function)

An open book or catalog can be copied with the left and right pages on sep-
arate sheets of paper.

The following copy methods are available, and there are settings for adding 
just a front cover or both front and back covers.

Setting

Description

Book Spread

Copies of the left and right pages of the page spread are printed on 
the same page without being separated.

Separation

Separate copies of each page in the page spreads are printed in the 
document page order.
The document is scanned to fit the size of paper that will be used.

Front Cover

The front cover and separate copies of each page in the page 
spreads are printed in the document page order.

Front and Back Cover

The front cover, separate copies of each page in the page spreads 
and the back cover are printed in the document page order.

SURVEYOR’S

REPORT

SURVEYOR’S

REPORT

c250.book  Page 19  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands