manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 353

8

Application functions

8-8

C250

App

lica

tio

n f

unct

ions

Chapter 8

8.3

Inserting different paper into copies (“Insert Sheet” 
function)

Different paper (such as colored paper) can be inserted for specified pages 
in the copies.

There are settings (“Copy” and “Blank”) for selecting whether or not the in-
serted pages are printed. When the settings are combined with single-sided 
copying or double-sided copying, the copies are printed as shown below.

If “Copy” is set, the document is copied as shown below when the specified 
paper is inserted for the specified page.

When page 6 is specified

If “Blank” was set, the specified paper is inserted after the specified page.

When page 5 is specified

!

Detail 

The specified paper can be inserted at a maximum of 15 locations within 
a document of up to 999 pages.

In double-sided documents, one double-sided page is considered to be 
two pages (one for the front and one for the back).

Double-sided copying is possible only if automatic duplex unit is in-
stalled.

Finishing

Description

Single-sided copies

The specified paper is inserted for the 6th page of the copy, 
and the 6th page of the document is copied onto it.

Double-sided copies

The back side of the 3rd page of the copy is left blank, the 
specified paper is inserted for the 4th page of the copy, and 
a double-sided copy of the 6th and 7th pages of the docu-
ment are printed onto it.

Finishing

Description

Single-sided copies

The specified paper is inserted as the 6th page of the copy.

Double-sided copies

The back side of the 3rd page of the copy is left blank, and 
the specified paper is inserted for the 4th page of the copy.

c250.book  Page 8  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands