Konica Minolta BIZHUB C250, User Manual

Page: 223 / 600

4
Additional copy operations
4-8 C250
Addit
ion
al copy op
era
tions
Chapter 4
4.3 Interrupting a copy job (Interrupt mode)
The current jobs can be temporarily interrupted so a document can be cop-
ied with different copy settings.
This is convenient for quickly making a copy.
!
Detail
For details on making a copy after printing of the current job is finished,
refer to “To increase priority for printing” on page 11-17.
To interrupt a copy job
1
Position the document to be copied. (For details, refer to page 3-7.)
2
Press the [Interrupt] key.
– If a job is being print-
ed, the message
“Job is stopping.”
appears.
The indicator on the [In-
terrupt] key lights up in
green and printing of the
current job stops.
? What settings are se-
lected when the [In-
terrupt] key is
pressed?
% When the [Interrupt] key is pressed, all functions and settings are
reset to their defaults.
?
Why is the [Interrupt] key not available?
% The [Interrupt] key cannot be pressed while a document is being
scanned.
3
Select the desired copy settings.
4
Press the [Start] key.
Printing begins for the job that the previous job was interrupted for.
Interrupt
c250.book Page 8 Tuesday, April 4, 2006 11:33 AM