Konica Minolta bizhub C224e, Quick Manual

Page: 84 / 150

Scan-to-Send function 3
3-14 bizhub C554e/C454e/C364e/C284e/C224e
3.2
Checking network settings of this machine
Tap [Utility], and select [Device Information]. Then, check that the IP address is displayed.
If no IP address is displayed, you need to configure the network.
- Tap [Utility], and select [Administrator Settings] - [Network Settings] - [TCP/IP Settings]. Configure the
required settings to suit your environment. For details, refer to the [User's Guide Online] on the DVD.
d
Reference
In general, the default settings are available for network connection; however, some network environments
require a change on network settings. For details, refer to the [User's Guide Online] on the DVD.
Checklist
While making notes in the checklist shown below, check computer information and configure settings for
preparation. The completed checklist is used for Store Address.
• For IPv4 environment • For IPv6 environment
Name Entry column Detail
Host Address Host name or IP address to which the scanned data is sent page 3-15
File Path Name of the dedicated folder to receive the scanned data page 3-15
User ID User name required to log in to the computer page 3-15
Password Password required to log in to the computer
•
You should not enter this column for security reasons.
Contact your sys-
tem administra-
tor.