Konica Minolta bizhub C224e, Quick Manual

Page: 53 / 150

bizhub C554e/C454e/C364e/C284e/C224e 2-27
2.3 Power supply 2
2.3.3 Power save function
If the specified time (default: 15 minutes) elapses after the machine becomes inactive, the machine automat-
ically shifts to the power save mode; for example, the touch panel display is turned off. The
Power key flashes
blue in the power save mode. The power save mode returns to the normal mode by pressing any key on the
Control Panel for instance.
There are two power save modes: the low power mode and the sleep mode. Sleep mode provides a greater
power saving effect than Low Power mode. However, the time required to return to Normal mode is longer
than the time required to revert to Low Power mode.
d
Reference
The time required to shift to each mode can be changed in the Administrator Settings. For details, refer to the
[User's Guide Online] on the DVD.
Reducing power consumption
To reduce power consumption in the standby state, change [Power Key Setting] to [Sub Power OFF].
Tap [Utility], and select [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] -
[Power Key Setting].
After the setting is changed, the power save mode shifts as shown below depending on how the
Power
key
is pressed.
- Pressing the
Power
key
– This machine shifts to the Sub Power OFF mode.
– In the Sub Power OFF mode, the machine can receive data or faxes, but cannot scan or print an original.
– If data or faxes are received when the machine is in the Sub Power OFF mode, they are printed when
the machine returns to the normal mode.
- Holding down the Power key
– This machine shifts to the ErP Auto Power OFF mode.
– In the ErP Auto Power OFF mode, this machine cannot receive data or faxes and also cannot scan or
print an original.
– This function provides a greater power saving effect than the Sub Power OFF mode, which is close to
the state where the main power is turned off.
To enable the machine to return to the normal mode from the Sub Power OFF or ErP Auto Power OFF mode,
press the
Power key again.
d
Reference
For details, refer to the [User's Guide Online] on the DVD.
2
1