background image

bizhub C554e/C454e/C364e/C284e/C224e

2-11

2.2

About this machine

2

2.2.3

Name of parts (MFP) (bizhub C554e/C454e)

Front side

No.

Name

Description

 1

Control Panel

Use the 

Touch Panel

 or buttons on this panel to operate this ma-

chine.

 2

Original Tray

Load the original.

 3

Stylus Pen

Used to operate the 

Touch Panel

.

 4

Bypass Tray

Used to load custom-size paper or special paper.

 5

Paper-Empty Indicator

Flashes orange when a tray runs low on paper and lights up orange 
when the tray runs out of paper.

 6

Paper Tray

Used to load standard-size paper.

 7

Lower Front Door

Open this door to replace consumables or to maintenance this ma-
chine.

 8

Upper Front Door

Open this door to replace a 

Toner Cartridge

.

 9

Data Indicator

Flashes blue while this machine is receiving a job. If a job is current-
ly spooled, this indicator lamp lights up blue.

10

Status Indicator

 

This indicator lights up white in phases according to the warm-up 
progress state when this machine has started or returned from the 
Power Save mode. The indicator lights up in white in a streaming 
fashion while a print job is normally carried out on this machine.

11

Warning Indicator

Flashes orange if a warning occurs. Lights up orange if this machine 
has stopped due to an error.

Summary of Contents for bizhub C224e























































































































































Reviews: