manualshive.com logo in svg

Konica Minolta bizhub C203 Series, User Manual

Share
Download
Konica Minolta bizhub C203 Series User Manual Download Page 331

C353/C253/C203

7-56

Application functions

7

7.13

Tiling copy images ("Image Repeat" function)

An original image can be repeatedly printed on a single sheet of paper.

The possible number of repeating images is automatically selected based on the size of the loaded original, 
the specified paper size and the zoom ratio.

The following repeating formats and settings are available.

1

Position the original to be copied.

–

For details on positioning the original, refer to 

"Feeding the original" on page 2-6

.

2

Load the paper to be used into the desired paper tray.

3

Touch [Application], and then touch [Book Copy/Repeat].

–

To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to 
the settings are canceled.

The Book Copy/Repeat screen appears.

Setting

Description

With Margin

Multiple copies are printed of the entire image within the specified area. The area around 
the image appears as a margin.

Without Margin

Multiple copies of the selected area of the image are printed to fill the paper; however, 
a part of the image may be cut off.

2/4/8 Repeat

A fixed number of copies of the selected image area are printed in the paper. The 
number of repeating copies can be set to 2, 4 or 8 times. However, any part of the image 
that does not fit within its specific section of the paper is cut off.

Original

With Margin

Without Margin

Summary of Contents for bizhub C203 Series























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands