Konica Minolta bizhub C203 Series User Manual Download Page 175

Page: 175 / 534

C353/C253/C203

3-28

Additional copy operations

The Message Display Time screen appears.

Select setting for the desired amount of time that messages are displayed.

–

Touch [3 seconds] or [5 seconds] to select how long messages are displayed.

–

To cancel changes to the settings, press the [Reset] key. All changes to the settings are canceled.

Touch [OK].

The Accessibility Setting screen appears again.

Touch [Close] or press the [Accessibility] key.

The Basic screen appears again.

3.7.8

Setting the "Sound Setting" functions

With the Sound Setting functions, settings can be specified for the sounds that are produced, for example,
when a key is pressed.

The following Sound Setting functions are available.

As the factory default, "Medium" is selected for all operation sounds.

Operation Confirmation Sound

Operation Confirmation
Sound

Input Accept Sound

When pressing a key in the control panel or a button on the
touch panel

Invalid Input Sound

When incorrectly pressing a key in the control panel or a but-
ton on the touch panel

Basic Sound

When switching settings and the default setting is selected

Successful Completion
Sound

Completed Operation
Sound

When an operation is completed successfully

Completed Transmis-
sion Sound

When a communication operation is completed successfully

Completed Preparation
Sound

When a device has finished setting up

Summary of Contents for bizhub C203 Series






















































































































































































































































































































































































































































































































































Search results

Summary of Contents for bizhub C203 Series

Reviews:

Brands by name

Popular brands

Konica Minolta bizhub C203 Series, User Manual

Search results

Summary of Contents for bizhub C203 Series

Reviews:

Brands by name

Popular brands