Konica Minolta bizhub C200, User Manual

Page: 56 / 268

C200 2-9
Basic copy operations
2
– For details on specifying the binding margin position,
refer to
"Selecting the position of the binding
margin (Margin settings)" on page 2-15 .
– For transparent or translucent originals, place a blank
sheet of paper of the same size as the original over
the original.
– For bound originals spread over two facing pages,
such as a book or magazine, position the top of the
original toward the back of this machine and align the
original with the
mark in the back-left corner of
the original scales, as shown.
4
Close the ADF or the original cover.
2.3.3 Scanning a multi-page original from the original glass
When sorting or making double-sided or combined copies using the original glass, place each page of a
multi-page document on the original glass to scan it. The following procedure describes how to place single-
sided original pages on the original glass to make double-sided copies.
0 If the "Group" setting was selected in the Finishing screen, the specified number of copies is printed
with each document page that is scanned.
0 If the "Sort" setting was selected in the Finishing screen, the specified number of document copies is
printed after all document pages are scanned.
1
Lift open the ADF or the original cover.
2
Position the first page or the first side of the original face down onto the original glass.
Original scales
Blank sheet
of paper