Konica Minolta bizhub C200, User Manual

Page: 233 / 268

C200 11-14
Utility mode
11
11.5 Specifying Administrator Management
This section describes the function and main registration parameters that can be specified after pressing the
[Utility/Counter] key, then touching [Admin.].
11.5.1 System Settings
Power Save Settings
Output Settings
2
Reminder
The "Output Tray Setting" parameter appears if the optional separetor is installed.
Language (I/O)
Date & Time Setting
Parameter Description Default Setting
Auto Reset Select the setting (between 1 and 240 minutes, "30 second"
or "OFF") for the desired length of time until the automatic
panel reset operation is performed in each mode (Copy and
Fax/Scan). 1 minute
Low Power Mode Set-
tings Specify the desired length of time (between 1 minute and 240
minutes) until the machine enters Power Save mode. 10 Minute
Sleep Mode Settings Specify the desired length of time (between 1 minute and 240
minutes) until the machine enters Sleep mode. 20 Minute
LCD Back- Light OFF Specify the desired length of time (between 1 and 240 min-
utes) until the touch panel backlight goes off. 1 minute
Enter Power Save
Mode Specify settings for faxing and printing. For details, refer to
the User’s Guide [Network Scan/Fax/Network Fax Opera-
tions] and the User’s Guide [Print Operations]. Immediately
Parameter Description Default Setting
Print/Fax Output
Setting Specify settings for faxing and printing. For details, refer to the User’s Guide [Network
Scan/Fax/Network Fax Operations] and the User’s Guide [Print Operations].
Output Tray Set-
ting Select the finishing tray for each type of job (copies, printouts, re-
ports and faxes). Copy: 2
Printer: 2
Network: 1
Fax (Port 1): 1
Fax (Port 2): 1
Description Default Setting
Select the input and output languages. English
Parameter Description Default Setting
Date & Time Setting Specify the current date and time. –
Time Zone Specify the time zone (between -12:00 and +13:00 in 30-
minute increments). 00:00
Daylight Saving Time Select whether or not daylight saving time is applied.
Type A: Daylight saving time is specified as Month/Day.
Type B: Daylight saving time is specified as
Month/Week/Day.
OFF: Daylight saving time is not applied. OFF