Konica Minolta bizhub C200, User Manual

Page: 158 / 268

C200 6-8
Copy paper/originals
6
5
Touch [Others].
6
Touch [A6Card w ].
– For paper sizes in metric measurements, touch [Metric].
– For paper sizes in inch measurements, touch [Inch Sizes].
– If "A6Card w " is selected, "Thick 3" is automatically selected. If paper other than postcards are
loaded, change the paper type setting. For details on the paper type settings, refer to
"Specifying
a setting for special paper" on page 6-14 .
7
Touch [OK], and then touch [OK].
The paper size for the tray 1 is set.
2
Reminder
If paper other than the specified paper size is loaded, a paper misfeed may occur since the paper size
is not automatically detected.
!
Detail
To specify the paper size setting for the bypass tray, touch the button for the bypass tray.
6.2.3 Specifying a non-standard paper size (Custom Size settings)
Non-standard-sized paper can be loaded into the tray 1 and the bypass tray.
If wide paper is loaded, it will be necessary to enter the paper size.
The following procedure describes how to specify the setting for non-standard-sized paper loaded into the
tray 1.