Konica Minolta bizhub 40p, Service Manual

Page: 172 / 431

Field Service V er. 1.0 Dec. 2007 11. SER V ICE MENU
137
bizhub 40P
Adjustment / Setting
11.3.4 PRINT MENU
A. MAINTENANCE INFO
B. EVENT LOG
C. CONFIGURATION PG
Functions • To produce an output of a list of setting values, adjustment values, total counter val-
ues, and others.
Use • To check the maintenance information.
The items which can be checked are as follows.
Device Caution Information
Count (total)
: Total counter value
Coverage (total) : Coverage rate
Replace count (total) : Number of times TC and fuser unit have been
replaced.
Setting/
Procedure 1. Select [MAINTENANCE INFO] and press the Menu/Select key.
2. Select [PRINT] and press the Menu/Select key.
Functions • To print the E V ENT LOG.
Use • To check the jams/troubles which occurred, and the history of replacing the consum-
ables.
The items which can be checked are as follows.
Paper Jam Error : The number of times jam have occurred and its history
Engine Fatal Error : The history of the troubles which required service call
Fuser Unit
: The history of replacing the fuser unit
Toner Cartridge : The history of replacing the toner cartridge
Trouble Counter : Trouble counting for each section
Setting/
Procedure 1. Select [E V ENT LOG] and press the Menu/Select key.
2. Select [PRINT] and press the Menu/Select key.
Functions • Prints the information concerning the configuration.
Use • To check the adjustment values set by the Maintenance Menu and Service Menu.
The items which can be checked are as follows.
TOP ADJUSTMENT
LEFT ADJUSTMENT
DENSITY ADJ
LD POWER
V IDEO TIME LAG
Setting/
Procedure 1. Select [CONFIGURATION PG] and press the Menu/Select key.
2. Select [PRINT] and press the Menu/Select key.