Konica Minolta bizhub 40p, Service Manual

Page: 151 / 431

9. Menu Field Service V er. 1.0 Dec. 2007
116
bizhub 40P
Adjustment / Setting
(2) CUSTOM SIZE
(3) PAPER TYPE
B. PAPER SIZE ERROR
Function • Sets the custom media width and length.
Use • To set the width and length of the custom media size.
Setting
/procedure 1. Select [CUSTOM SIZE] and press the Menu/Select key.
2. Select [WIDTH] or [LENGTH] and press Menu/Select key.
3. Set desired number with the up key
U
/down key
V
and press the Menu/Select key.
<For North America>
• The default setting of WIDTH is 8.50 inches.
WIDTH: 3.00 inches to 8.50 inches.
• The default setting of LENGTH is 11.00 inches.
LENGTH: 5.00 inches to 14.00 inches.
<For other destinations>
• The default setting of WIDTH is 210 mm.
WIDTH: 76 mm to 216 mm.
• The default setting of LENGTH is 297 mm.
LENGTH: 127 mm to 356 mm.
NOTE
• By changing the [UNIT OF MEASURE] setting (INCHES/MILLIMETERS), the
custom size units are changed.
Function • Sets the default media type.
Use • To set the default media type.
Setting
/procedure • The default setting is PLAIN PAPER.
“PLAIN PAPER”/RECYCLED/THICK 1/THICK 2/THICK 3/LABEL/TRANSPARENCY/
EN
V ELOPE/POSTCARD/THIN PAPER
Function • To select whether to detect a paper size error or not.
ENABLE : Paper size error is detected.
DISABLE : No paper size error is detected.
Use
Setting
/procedure • The default setting is ENABLE.
“ENABLE” DISABLE