manualshive.com logo in svg

Konica Minolta Bizhub 4000i, User Manual

Share
Download
Konica Minolta Bizhub 4000i User Manual Download Page 211

3

Unpack the optional tray, and then remove all packing material.

Note: 

If optional trays are already installed, then unlock them from the printer before lifting the printer. Do

not try to lift the printer and trays at the same time.

4

Align the printer with the optional tray, and then lower the printer until it 

clicks

 into place.

CAUTION—POTENTIAL INJURY: 

If the printer weight is greater than 18 kg (40 lb), then it requires

two or more trained personnel to lift it safely.

5

Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY: 

To avoid the risk of fire or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

6

Turn on the printer.

Add the tray in the print driver to make it available for print jobs. For more information, see 

“Adding available

options in the print driver” on page 213

.

Software

Supported operating systems

Using the 

Drivers

 CD, you can install the printer software on the following operating systems:

•

Windows 8.1

•

Windows Server 2012 R2

•

Windows Server 2012

•

Windows 7 SP1

•

Windows Server 2008 R2 SP1

•

Windows Server 2008 SP2

•

Windows 10

Upgrading and migrating

211

Summary of Contents for Bizhub 4000i




































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands