Action
Yes
No
Step 1
a
Adjust the guides in the tray to the correct position for the paper
loaded.
b
Print the document.
Is the print crooked or skewed?
Go to step 2.
The problem is
solved.
Step 2
a
Check if the paper loaded is supported.
Note:
If paper is not supported, then load a supported paper.
b
Print the document.
Is the print crooked or skewed?
Go to step 3.
The problem is
solved.
Step 3
a
Check the pick tire in the tray for signs of damage and
contamination, and replace if necessary.
b
Print the document.
Is the print crooked or skewed?
Contact
The problem is
solved.
Repeating defects
Note:
Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to
Settings
>
Troubleshooting
>
Print Quality Test Pages
. For non
‑
touch
‑
screen printer models, press
to
navigate through the settings.
Action
Yes
No
Step 1
Using the Print Quality Test Pages, check if the distance between
the repeating defects is equal to any of the following:
•
97 mm (3.82 in.)
•
47 mm (1.85 in.)
•
38 mm (1.5 in.)
Does the distance between the repeating defects match any of the
measurements?
Go to step 2.
Take note of the
distance, and then
contact
Troubleshooting
186
Summary of Contents for Bizhub 4000i
Page 1: ...User s Guide 2018 3 AAFM 9565 11A...
Page 30: ...2 Select the job to cancel Printing 30...
Page 147: ...Maintaining the printer 147...
Page 155: ...Paper jam in the front door 1 Remove the tray 2 Open the front door Clearing jams 155...
