Konica Minolta bizhub 360, User Manual

Page: 73 / 692

Before Making Copies 2
bizhub 360 2-21
Be
fo
re
M
a
king
Cop
ies
Ch
ap
te
r 2
2
Reminder
Do not press the touch panel with an object with a sharp end or apply ex-
treme pressure to it, otherwise it may be scratched or damage
10 Sub power switch Turns on/off the copying and scanning functions.Turning
it off will terminate all the functions other than the print
and fax functions, and enter the sleep mode.
11 [Stop] key Press to abort the ongoing operation; delete the stored
memory.
12 [Start] key Press to start operations such as copying. When this ma-
chine is ready to begin copying, the indicator on [Start]
key lights up in green. If the indicator on key lights up in
orange, copying cannot be started.
13 Main Power indicator Lights up in green when the main power is turned on.
14 Data indicator Blinks in green while a print job is being received. Lights
up in green when a print job is queued for printing or when
printing is in progress.
15 [Proof Copy] key Press to print a single sample copy to be checked before
printing a large number of copies.
16 [C] (Clear) key Press to change a value (such as the number of copies
and the zoom ratio) entered from the keypad.
17 Keypad Press to enter values for various settings, including the
number of copies and the zoom ratio.
18 [Mode Check] key Press to display the Mode Check Screen to view the cur-
rent copy settings.
19 [Utility/Counter] key Press to display the Utility Screen or the sales counter.
20 [Mode Memory] key Press to register the desired copy settings as a program
or to recall a registered copy program.
21 [Help] key Press to display the Help Screen that explains how to
copy or use other functions.
22 [Accessibility] key Press to change the control panel and touch panel set-
tings.
23 Contrast dial Use to adjust the contrast of the touch panel.
24 [Enlarge Display] key Press to switch between the Enlarge Display mode and
the standard display mode.
No. Name Description